Introducing our newly desiged and reengineered Touring Side Steps for your SPRINTER – the enhanced replacement for our famous nerf bars.
Designed to improve comfort, ease, and safety to get into your lifted 4×4 van, these side steps offer a smoother entry and exit. Say goodbye to ankle mishaps, dogs getting stuck, or children trapped between the bars and the van body.
Our updated design seamlessly integrates with our Recon Front Bumper for a cohesive look. Crafted from lightweight and rust-free aluminum, they feature a stylish thread pattern with our Aluminess logo.
Regardless of wheelbase, these side steps provide an optimal entrance by focusing on covering just the door area, reducing overall vehicle weight while maintaining functionality. Rest assured that they fit perfectly for most van setups, regardless of your van’s underside setup. Please contact us regarding Revel and Storyteller setups.
Features:Â
- Length: 34 ¾”
- Tread pattern and drain holes incorporated into steps
- Sticks out less than previous generation nerf bars (more than 1.5” closer to van)
- Higher overall clearance than previous generation nerf bars (more than 1” higher)
- Newly designed slider door reinforcement bracket for added stiffness
- Easy Installation
- Weight Capacity: 300 lbs
- Product Weight: Approximately 25 lbs
As always with all our products these are manufactured right here in the Golden State.
Please note that driver and passenger sides are sold as a pair.
The purpose of this product is to provide easy access to the inside and outside of your van without weighing down your suspension. Our nerf bars/side steps are not rock sliders.
May interfere with passenger side water tanks. Please call customer service for details.
The Touring Roof Rack is the ultimate companion for those who crave the open road. Designed specifically for epic cross-country road trips, this rack is here to turn your dreams into reality. With its lowered front loop, the Touring Roof Rack offers unparalleled flexibility in attaching a wide range of forward-facing lights, ensuring optimal visibility during nighttime travels. From sleek straight light bars to rugged safari-inspired lights, this rack can securely hold any kind of lighting setup you desire.
In addition to its versatility with lights, this custom-built roof rack features raised rails on the passenger, driver, and back sides. These raised rails provide extra security for your gear, ensuring it stays in place while you conquer the miles ahead. As with all our custom racks, the Touring Roof Rack is meticulously designed to accommodate your specific vent and roof layout, ensuring a seamless fit and installation process.
We understand the thrill of the open road and the desire for unforgettable adventures. The Touring Roof Rack embodies our commitment to quality, functionality, and style, enabling you to embark on your cross-country journey with confidence. So, get ready to hit the road and make memories that will last a lifetime with the Touring Roof Rack as your trusted companion.
Compatibility:
- Up to 40″ Light Bar
- Compatible with Touring Roof Rack
- Stock or aftermarket roof rails on all Sprinter models required.
PLEASE NOTE: Roof racks and roof rack accessories may interfere with factory roof mounted satellite antennas. Antenna relocation may be required for full satellite radio functionality.
Maximize Your Sprinter’s Potential with the Aluminess Rear Door Storage Box Rack
More space. More freedom. The Aluminess Rear Door Box Rack transforms your Sprinter into a true adventure rig. Mount a rugged, lockable storage box right where you need it—easy to access and out of the way. Free up interior space for people and gear, while keeping your tools, recovery gear, or camp essentials safe and organized.
Built from lightweight, all-aluminum construction, it bolts directly to factory mounting points—no need for pivots, ball joints, or complicated installs. The rack swings with the rear door for smooth, intuitive use with zero maintenance required. Tough, clean, and trail-tested—it’s the upgrade your van’s been waiting for.
Key Features:
- Powder-coated textured black.
- No swapping hinges!
- No drill, no dent: Bolt-on item – requires no drilling through your door. Drilling through your van door might cause future dents and damage to your van!
- Installation does not require removing the hinge from the door. This keeps factory alignment of your door!
- Compatible with backup sensors.
- Dynamic Weight Capacity: 150 lbs.
Black awning housing with a gray canvas. Must mount to our Roof Rack. Includes mounting brackets for application on the Aluminess rack.
If you already have the Aluminess ladder and need a way to mount it to your new Modular Roof Rack, order this kit.
Whether you’re hauling gear in an Aluminess roof rack or just using a basic storage box, the roof of your Sprinter is prime real estate for bulky cargo. The catch? Getting up there safely to secure it all.
That’s where the Aluminess Rear Door Ladder comes in. Made from lightweight, all-aluminum construction, it bolts directly into factory mounting points—no complicated pivots or ball joints needed! For added grip and safety, the top of the ladder is shaped to lock in your foot for more confident climbing.
It’s unique mounting design swings with the door on the same plane so no ball joints are needed. This means no maintenance or parts to wear out!
Want even more function? Go for the combo kit. It includes a mount for a box or spare tire and a set of sleek, offset steps that let you climb easily around your mounted gear.
Key Features:
- Easy no-drill installation utilizes factory mounting points and does not require complicated ball joints.
- No drill, no dent: Bolt-on item – requires no drilling through your door. Drilling through the thin sheet metal of your van door might cause future dents and damage to your van!
- For added grip and safety, the top of the ladder is shaped to lock in your foot for more confident climbing. Curved ladder tops are dangerous and don’t provide the support necessary when both climbing and securing cargo at the same time. Our ladder allows you to lock your foot up against the side of the ladder for leverage and confidence.
- The ladder sits an average of 4.5” off the van giving ample room for your foot to comfortable step on each rung without adding too much length to the van.
- The fold down steps included in the tire mount kit provide the largest surface area in the industry for easy access past the tire or storage box.
- Compatible with backup sensors
- Available with an optional universal Tire Mounting System
- Didn’t purchase the combo kit? No worries! It’s an easy, bolt-on accessory that you can add later!
- Compatible with a RotopaX Mounting Kit
- Dynamic Weight Capacity: 100 lbs
- 300 lbs. Static Weight Capacity
- Powder-coated textured black
Compatibility:
- Replaces rear door magnet, door must be equipped with this piece to avoid drilling holes. Some rare base model vans do not include the rear door magnet
- Compatible with Mercedes 2007-2018 Sprinter
NOTE: Box and other accessories NOT included!
FAQ:
Q: Do I need to purchase additional hardware to mount a storage box in place of my spare tire?
A: No, when purchased as a combo with the spare tire/box mount, all necessary hardware for mounting either option will be included with your purchase.
Q: Is it compatible with backup sensors?
A: Yes, the product is compatible with backup sensors.
Q: How difficult is the installation process?
A: For most, it’s a straight forward DIY installation that takes 2-3 hours. Skill levels vary and unknown factors such as existing exterior mounts, accessories or other aftermarket parts can effect the install time and difficulty. For detailed guidance, please refer to our installation instructions for a step-by-step process.
Gear Up and Go Farther with the Aluminess Rear Door Box and Tire Rack for NCV3 Mercedes Sprinter
Built for adventure, designed for convenience. The Aluminess Rear Door Box and Tire Rack lets you carry a full-size spare where it’s secure, accessible, and out of the way. No more struggling with undersized spares or sacrificing undercarriage space, that’s now open for extra fuel or water tanks, perfect for extended off-grid travel.
Crafted from ultra-light, all-aluminum construction, this rack installs directly to factory mounting points, no pivots, no ball joints, no nonsense. Its smart swing-arm design moves with your rear door, keeping everything simple, solid, and maintenance-free. Rugged, reliable, and ready for wherever the road takes you.
Key Features:
- Powder-coated textured black.
- No swapping hinges!
- No drill, no dent: Bolt-on item – requires no drilling through your door. Drilling through your van door might cause future dents and damage to your van!
- Installation does not require removing the hinge from the door. This keeps factory alignment of your door!
- Tamper proof hardware provides extra level of security to reduce chances of wheel theft.
- Works with larger dually hub bore diameter!
- Compatible with backup sensors.
- Universal Tire Mounting System.
- Compatible with a RotopaX Mounting Kit.
- Don’t need to mount your spare on the back? Mount one of our boxes for extra storage instead!
- Dynamic Weight Capacity: 100 lbs.
Storage is at a premium on van builds. Aluminess solves this problem with our all-aluminum Surf and Paddle Board Carrier. Mount your paddle or surf board using one of our Surf Poles, driver-side ladder and a pair of surf hooks.
Key Features:
- Compatible with StoryTeller and Winnebago Revel Conversion.
- Penthouse surf pole is compatible with Sportsmobile, Field Van and Exclusive Outfitters low roof pop tops.
- Clears Flarespace Flares.
- Sits approximately 5.5″ inches from the side of the van.
- Ships for free!
- Compatibile with Aluminess nerf bars and side steps.
NOTE: Surf Pole is not compatible with all styles of nerf bars and side steps. Please contact our office to confirm our surf pole will work with your side steps and nerf bars.
NOTE: Sprinter High Roof and Low Roof require factory or after-market roof tracks for installation. Ladder and Surf Hooks sold separately.
Expedition vehicles can be tricky to get in and out of, especially if they are 4×4 and lifted. Our aluminum Nerf Bars for the Mercedes Sprinter van make it easy to get in and out of your van. They are designed to retain ground clearance, but also provide an easy place to help enter and exit your van. They are also a great way to protect your Sprinter from those pesky shopping carts. Now compatible with the factory A/C and auxiliary heater.
Nerf bars include both driver and passenger side.
The purpose of this product is to provide easy access to the inside and outside of your van without weighing down your suspension. Our nerf bars/side steps are not rock sliders.
The Aluminess Slimline Rear Bumper 2007-18 is the perfect accessory to carry items that you do not want inside your vehicle, such as camping stoves, BBQs, and a spare tire, allowing you to put extra fuel or water underneath the vehicle. Our unique rear bumper was redesigned to deliver extra ground clearance and a stronger swing arm structure. Enjoy our three different configurations to accommodate your adventure!
Key Features:
- Powder-coated textured Black
- Lightweight aluminum
- Square light holes
- Ability to mount boxes, lights, and accessories (not included in standard bumper price)
- 100 Pound Weight Limit On Standard Swing Arm
- 200 Pound Weight Limit On Bike Rack Swing Arm
- 5000 Pound Towing Capacity
- 500 Pound Tongue Weight (weight in the Aluminess storage box counts against the tongue weight)
- 35 in. Maximum Tire Size
Compatibility:
- Does not fit 144 Wheel Base Dually Vans
- Vehicles with exhaust that extends past the rear pinch weld will need to shorten the exhaust for bumper to fit
- Sensor holes can be drilled upon request. However, back up sensors will not work. Compatible with the blind spot assist
