Introducing our newly desiged and reengineered Touring Side Steps for your SPRINTER – the enhanced replacement for our famous nerf bars.
Designed to improve comfort, ease, and safety to get into your lifted 4×4 van, these side steps offer a smoother entry and exit. Say goodbye to ankle mishaps, dogs getting stuck, or children trapped between the bars and the van body.
Our updated design seamlessly integrates with our Recon Front Bumper for a cohesive look. Crafted from lightweight and rust-free aluminum, they feature a stylish thread pattern with our Aluminess logo.
Regardless of wheelbase, these side steps provide an optimal entrance by focusing on covering just the door area, reducing overall vehicle weight while maintaining functionality. Rest assured that they fit perfectly for most van setups, regardless of your van’s underside setup. Please contact us regarding Revel and Storyteller setups.
Features:
- Length: 34 ¾”
- Tread pattern and drain holes incorporated into steps
- Sticks out less than previous generation nerf bars (more than 1.5” closer to van)
- Higher overall clearance than previous generation nerf bars (more than 1” higher)
- Newly designed slider door reinforcement bracket for added stiffness
- Easy Installation
- Weight Capacity: 300 lbs
- Product Weight: Approximately 25 lbs
As always with all our products these are manufactured right here in the Golden State.
Please note that driver and passenger sides are sold as a pair.
The purpose of this product is to provide easy access to the inside and outside of your van without weighing down your suspension. Our nerf bars/side steps are not rock sliders.
May interfere with passenger side water tanks. Please call customer service for details.
The Touring Roof Rack is the ultimate companion for those who crave the open road. Designed specifically for epic cross-country road trips, this rack is here to turn your dreams into reality. With its lowered front loop, the Touring Roof Rack offers unparalleled flexibility in attaching a wide range of forward-facing lights, ensuring optimal visibility during nighttime travels. From sleek straight light bars to rugged safari-inspired lights, this rack can securely hold any kind of lighting setup you desire.
In addition to its versatility with lights, this custom-built roof rack features raised rails on the passenger, driver, and back sides. These raised rails provide extra security for your gear, ensuring it stays in place while you conquer the miles ahead. As with all our custom racks, the Touring Roof Rack is meticulously designed to accommodate your specific vent and roof layout, ensuring a seamless fit and installation process.
We understand the thrill of the open road and the desire for unforgettable adventures. The Touring Roof Rack embodies our commitment to quality, functionality, and style, enabling you to embark on your cross-country journey with confidence. So, get ready to hit the road and make memories that will last a lifetime with the Touring Roof Rack as your trusted companion.
Compatibility:
- Up to 40″ Light Bar
- Compatible with Touring Roof Rack
- Stock or aftermarket roof rails on all Sprinter models required.
PLEASE NOTE: Roof racks and roof rack accessories may interfere with factory roof mounted satellite antennas. Antenna relocation may be required for full satellite radio functionality.
Introducing the Aluminess Rear Door passenger side box rack for the Mercedes Sprinter. This item bolts on using factory hardware inside of the door, No Drilling Required! Best of all, it works with both 180 and 270 hinges. No need to fuss with swapping out and painting new hinges just to mount your rack!
Powder coated black.
Compatible with all style hinges.
Bolt on item – requires no drilling through your door.
Compatible with back up sensors.
Boxes and accessories are not included in standard box rack price.
Support posts are included with this product.
Black awning housing with a gray canvas. Must mount to our Roof Rack. Includes mounting brackets for application on the Aluminess rack.
If you already have the Aluminess ladder and need a way to mount it to your new Modular Roof Rack, order this kit.
Whether you have an Aluminess roof rack or just a simple storage box, the Sprinter roofs are a great place to store bulky things. The problem is how you get up there to strap everything down. Aluminess solves this problem with their all-aluminum rear door ladder. This item bolts on using factory hardware inside of the door, No Drilling Required! Best of all, it works with both 180 and 270 hinges so there’s no need to fuss with painting and swapping out hinges just to mount your ladder. Need a box or tire with your ladder? Order the combo kit which comes with a mount for a box or tire and a set of sleek steps that allow you to climb up your ladder around the tire or box!
Key Features:
- Powder coated black.
- Compatible with all style hinges.
- Bolt on item – requires no drilling through your door.
- Compatible with back up sensors.
- Compatible with a RotopaX Mounting Kit.
Introducing the Aluminess Rear Door driver side box and tire rack for the Mercedes Sprinter. Oversize tires won’t fit under the van and require the tire to be relocated. Not only can you carry your full-size spare, but you will now have extra room under the van for auxiliary fuel and water tanks. This item bolts on using factory hardware inside of the door, No Drilling Required! Best of all, it works with both 180 and 270 hinges. No need to fuss with swapping out and painting new hinges just to mount your rack! Don’t want to mount a spare? Instead of mounting a tire to the driver side, you can mount one of our storage boxes!
Key Features:
- Powder coated black.
- Compatible with all style hinges.
- Bolt on item – requires no drilling through your door.
- Compatible with back up sensors.
- Boxes and accessories are not included in standard box rack price.
- Compatible with a RotopaX Mounting Kit.
Storage is at a premium on van builds. Aluminess solves this problem with our all-aluminum Surf and Paddle Board Carrier. Mount your paddle or surf board using one of our Surf Poles, driver-side ladder and a pair of surf hooks.
Key Features:
- Compatible with StoryTeller and Winnebago Revel Conversion.
- Penthouse surf pole is compatible with Sportsmobile, Field Van and Exclusive Outfitters low roof pop tops.
- Clears Flarespace Flares.
- Sits approximately 5.5″ inches from the side of the van.
- Ships for free!
- Compatibile with Aluminess nerf bars and side steps.
NOTE: Surf Pole is not compatible with all styles of nerf bars and side steps. Please contact our office to confirm our surf pole will work with your side steps and nerf bars.
NOTE: Sprinter High Roof and Low Roof require factory or after-market roof tracks for installation. Ladder and Surf Hooks sold separately.
The Aluminess Slimline Rear Bumper 2007-18 is the perfect accessory to carry items that you do not want inside your vehicle, such as camping stoves, BBQs, and a spare tire, allowing you to put extra fuel or water underneath the vehicle. Our unique rear bumper was redesigned to deliver extra ground clearance and a stronger swing arm structure. Enjoy our three different configurations to accommodate your adventure!
Key Features:
- Powder-coated textured Black
- Lightweight aluminum
- Square light holes
- Ability to mount boxes, lights, and accessories (not included in standard bumper price)
- 100 Pound Weight Limit On Standard Swing Arm
- 200 Pound Weight Limit On Bike Rack Swing Arm
- 5000 Pound Towing Capacity
- 500 Pound Tongue Weight (weight in the Aluminess storage box counts against the tongue weight)
- 35 in. Maximum Tire Size
Compatibility:
- Does not fit 144 Wheel Base Dually Vans
- Vehicles with exhaust that extends past the rear pinch weld will need to shorten the exhaust for bumper to fit
- Sensor holes can be drilled upon request. However, back up sensors will not work. Compatible with the blind spot assist
The Aluminess Sprinter Front Winch Bumper 2014-2018 is designed to protect your investment while providing a bold and aggressive design. The bumper is winch-compatible, includes two hooks, and is powder-coated black for a durable finish. Whether you are looking to explore the world or provide major protection to your vehicle, we can get you there!
Key Features:
- Powder-coated textured Black
- Standard bumper configuration is square lights, 1.5” Brush Guard
- Ability to mount with lights, shackles and a receiver (not included in standard bumper price)
- Square light holes
- Has vents and the Aluminess “A” Cut into the front
Compatibility:
- Compatible with the front parking sensors and collision assist
- Bumper inhibits headlight washers from working – it can still be installed on these models, but the headlight washers will be blocked from use
- Winch manufacturers are continually changing winch sizes and designs. Solenoid relocation will likely be required with this bumper
