Customize your Recon Modular Roof Rack with our easy-to-install Panel Full Kits, designed for Sprinter, Promaster and Transit vans. Whether you are mounting solar panels, securing gear, or just looking for a solid platform, these panels give you the flexibility to build your rack your way.
NOTE: Due to universal panel lengths, full and half rack configurations are approximate. Full floor kits may be slightly shorter than full length.
Choose from Small Panels (27″ x 17″) or Long Panels (44″ x 10″), or combine both to dial in the exact setup you need. Each panel uses our exclusive FrontLoader system, which allows seamless integration with Aluminess accessories, plus simple adjustments as your build evolves.
Install just a few panels for targeted gear mounting or fully deck out your roof for maximum utility. Whatever your adventure demands, these kits help you make the most of every square inch.
Key Features:
- Mix and match panel sizes for a custom fit
- Designed for solar panels, gear storage, rooftop tents, and more
- Lightweight, corrosion-resistant aluminum construction
- Easy to add, move, or remove with FrontLoader hardware
- Sold as kits for quick configuration
Compatibility:
- Compatible with Aluminess Recon Modular Roof Rack – Sprinter 2007+
- Compatible with Aluminess Recon Modular Roof Rack – Transit 2015+
- Compatible with Aluminess Recon Modular Roof Rack – Promaster 2014+
- Designed exclusively for Recon roof racks, this add-on kit takes your setup to the next level—just pair it with an existing Recon rack or grab one to unlock its full potential!
Customize your Recon Modular Roof Rack with our easy-to-install Panel Half Kits, designed for Sprinter, Transit and Promaster vans. Whether you are mounting solar panels, securing gear, or just looking for a solid platform, these panels give you the flexibility to build your rack your way.
NOTE: Due to universal panel lengths, full and half rack configurations are approximate. Half flooring kits may be slightly longer or shorter than 50% of the rack.
Choose from Small Panels (27″ x 17″) or Long Panels (44″ x 10″), or combine both to dial in the exact setup you need. Each panel uses our exclusive FrontLoader system, which allows seamless integration with Aluminess accessories, plus simple adjustments as your build evolves.
Install just a few panels for targeted gear mounting or fully deck out your roof for maximum utility. Whatever your adventure demands, these kits help you make the most of every square inch.
Key Features:
- Mix and match panel sizes for a custom fit
- Designed for solar panels, gear storage, rooftop tents, and more
- Lightweight, corrosion-resistant aluminum construction
- Easy to add, move, or remove with FrontLoader hardware
- Sold as kits for quick configuration
Compatibility:
- Compatible with Aluminess Recon Modular Roof Rack – Sprinter 2007+
- Compatible with Aluminess Recon Modular Roof Rack – Transit 2015+
- Compatible with Aluminess Recon Modular Roof Rack – Promaster 2014+
- Designed exclusively for Recon roof racks, this add-on kit takes your setup to the next level—just pair it with an existing Recon rack or grab one to unlock its full potential!
Customize your Recon Modular Roof Rack with our easy-to-install Panel Starter Kits, designed for Sprinter, Promaster and Transit vans. Whether you are mounting solar panels, securing gear, or just looking for a solid platform, these panels give you the flexibility to build your rack your way.
NOTE: Maximum AC dimensions for AC kit on Sprinter racks is 43.5″ Long by 35.5″ wide. Maximum AC dimensions for AC kit on Transit and Promaster racks is 43.5″ Long by 40.5″ wide.
Choose from Small Panels (27″ x 17″) or Long Panels (44″ x 10″), or combine both to dial in the exact setup you need. Each panel uses our exclusive FrontLoader system, which allows seamless integration with Aluminess accessories, plus simple adjustments as your build evolves.
Install just a few panels for targeted gear mounting or fully deck out your roof for maximum utility. Whatever your adventure demands, these kits help you make the most of every square inch.
Key Features:
- Mix and match panel sizes for a custom fit
- Designed for solar panels, gear storage, rooftop tents, and more
- Lightweight, corrosion-resistant aluminum construction
- Easy to add, move, or remove with FrontLoader hardware
- Sold as kits for quick configuration
Compatibility:
- Compatible with Aluminess Recon Modular Roof Rack – Sprinter 2007+
- Compatible with Aluminess Recon Modular Roof Rack – Transit 2015+
- Compatible with Aluminess Recon Modular Roof Rack – Promaster 2014+
- Designed exclusively for Recon roof racks, this add-on kit takes your setup to the next level—just pair it with an existing Recon rack or grab one to unlock its full potential!
The most sold Sprinter van Side Ladder in the history of overlanding has been redesigned with updated features! Crafted from high-grade aluminum, the Legacy Ladder offers unparalleled strength and corrosion resistance, ensuring it can withstand the harshest terrains and weather conditions. Whether it’s accessing roof storage, rooftop tents, or simply capturing breathtaking views, the Sprinter van Legacy Side Ladder provides a secure and convenient solution for adventurers seeking new heights.
Key Features:
- High clearence: don’t get hung up on rocks!
- Redesigned flat steps for better access to your roof
- L-Track Bow-ties to secure additional accessories
- Maintains the unique and iconic look of going into the wheel-well
- RVIA Compliant
- Clears Flarespace Flares
- Ergonomic Spacing of Steps (all steps are evenly spaced for comfortable climbing)
- Easy Installation
- Ships for free!
Compatibility:
- Compatible with Aluminess nerf bars and side steps.
- Compatible with Storyteller and Winnebago Revel Conversion.
- Mounts to factory or aftermarket roof rails.
The Recon Modular Roof Rack is ideal for the DIY overland adventurer. A modular roof rack system for your Sprinter van that offers unparalleled versatility and cost-effective. You don’t need to have your flooring layout figured out up front, you are free to change!
Not sure where to start? Check out our Modular Panel Kits, designed to make planning and installation easier than ever.
Designed for customizing roof racks, it easily fits any vehicle’s roof layout and personal preferences. This flexibility optimizes roof space for various activities, whether it’s loading camping gear, kayaks, or other adventure essentials. It also accommodates various accessories, including rooftop tents, awnings, lights, and a range of Aluminess accessories.
Our Flooring Panels feature our innovative FrontLoader system, which provides the most versatility in the market and is fully compatible with our entire accessory line. You can now customize your Recon Modular Roof Rack to carry from solar panels to just a few accessories on your Sprinter roof.
The Aluminess Recon Modular Rack includes side rails, removable crossbars, and a front air dam. You can place the removable crossbars anywhere on this rack! The base price of the roof rack does not include the flooring panels – panels are sold separately.
Key Features:
- Adaptable to ANY Roof Layout
- DIY Roof Rack Installation
- Full Customization
- Optimize Roof Space
- Minimize wind resistance
- User-friendly
- Easily Mount Solar Panels!
- Easily Add Flooring Panels (Sold Separately)
- Includes 6-10 Removable Crossbars according to the Wheel Base
- Free Shipping!
Dimensions Info:
144WB
- Length: 137.9″
- Width: 55.9″
- Height: 7.9″
- Weight: 64 lbs
170WB – Regular Body
- Length: 177.2″
- Width: 55.9″
- Height: 7.9″
- Weight: 84 lbs
170WB – Extended Body
- Length: 183.4″
- Width: 55.9″
- Height: 7.9″
- Weight: 95 lbs
Compatibility:
- Optional awning mounting brackets for Fiamma F45 or similar wall-mounted awnings.
- Stock or aftermarket roof rails on all Sprinter models required.
- Roof rack base price does not include flooring panels or additional roof rack accessories.
- Zamp 100 Obsidian fits perfectly on the Long Panel!
At Aluminess, we’re all about creating unforgettable adventures – and our Explorer Roof Rack is no exception. Designed with the adventurous explorer in mind, this rack is built to take you off the beaten path and into the unknown.
DETAILS
- Arced front design to enhance van aesthetics and accommodate curved lightbar installation.
- Underneath mounted front lights with continuous perforated flooring to optimize roof rack space.
- Two forward facing light options: Baja Designs OnX6 50″ curved light bar or Baja Designs Linkable lights (lights sold separately).
- Custom-built vent specifications with standard vent cut-outs included. Non-standard and off center-line vent cut-outs available upon inquiry.
- Option for integrated load-lights below the rack for maximum protection, featuring Baja Designs S2 lights (lights sold separately). Available on passenger, rear, and/or driver side.
- Passenger side load-lights remain functional with an expanded awning as they sit below it.
- Integrated wire chasing eliminates the need for zip ties, with wires running within the rack and exiting above the B-pillar.
- Upper rungs are slightly recessed for a streamlined design following Sprinter body lines.
- Optional awning mounting brackets for Fiamma F45 or similar wall-mounted awnings.
- Compatible with stock or aftermarket roof rails on all Sprinter models.
- Currently not available for 144 wheel-base low-roof vans.
Compatibility:
- Stock or aftermarket roof rails on all Sprinter models required.
PLEASE NOTE: Roof racks and roof rack accessories may interfere with factory roof mounted satellite antennas. Antenna relocation may be required for full satellite radio functionality.
Newly enhanced! Aluminess has added L-Track Bowtie mounts and rock light mounts for even more functionality! Tie down cargo or hook up your dog leash with the newly added L-Track mounts.
The Recon steps now have rock light mounts (lights sold separately) integrated into the bottom of the step. See where you are stepping or be the envy of the camp with mood lighting without the fuss of figuring out how to mount rock lights under your van.
Introducing our newly designed and reengineered Recon Side Steps for your SPRINTER – the enhanced replacement for our famous nerf bars.
Designed to improve comfort, ease, and safety to get into your lifted 4×4 van, these side steps offer a smoother entry and exit. Say goodbye to ankle mishaps, dogs getting stuck, or children trapped between the bars and the van body.
Our updated design seamlessly integrates with our Recon Front Bumper for a cohesive look. Crafted from lightweight and rust-free aluminum, they feature a stylish tread pattern with our Aluminess logo.
Regardless of wheelbase, these side steps provide an optimal entrance by focusing on covering just the door area, reducing overall vehicle weight while maintaining functionality. Rest assured that they fit perfectly for most van setups, regardless of your van’s underside setup. Please contact us regarding Revel and Storyteller setups.
Key Features:
- Step in with confidence. The generous 6.5″ surface gives you easy, stable access to your van—without getting in the way on the trail. It’s comfort without compromise.
- Driver side step length measures at: 20 ½”
- Passenger side step length measures at: 76″
- Tread pattern and drain holes incorporated into steps
- Sticks out less than previous generation nerf bars (more than 1.5” closer to van)
- Higher overall clearance than previous generation nerf bars (more than 1” higher)
- Newly designed slider door reinforcement bracket for added stiffness
- Easy Installation
- Weight Capacity: 300 lbs
- Product Weight: Approximately 25 lbs
As always with all our products these are manufactured right here in the Golden State. Please note that driver and passenger sides are sold as a pair. The purpose of this product is to provide easy access to the inside and outside of your van without weighing down your suspension. Our nerf bars/side steps are not rock sliders. May interfere with passenger side water tanks. Please call customer service for details.
The Touring Roof Rack is the ultimate companion for those who crave the open road. Designed specifically for epic cross-country road trips, this rack is here to turn your dreams into reality. With its lowered front loop, the Touring Roof Rack offers unparalleled flexibility in attaching a wide range of forward-facing lights, ensuring optimal visibility during nighttime travels. From sleek straight light bars to rugged safari-inspired lights, this rack can securely hold any kind of lighting setup you desire.
In addition to its versatility with lights, this custom-built roof rack features raised rails on the passenger, driver, and back sides. These raised rails provide extra security for your gear, ensuring it stays in place while you conquer the miles ahead. As with all our custom racks, the Touring Roof Rack is meticulously designed to accommodate your specific vent and roof layout, ensuring a seamless fit and installation process.
We understand the thrill of the open road and the desire for unforgettable adventures. The Touring Roof Rack embodies our commitment to quality, functionality, and style, enabling you to embark on your cross-country journey with confidence. So, get ready to hit the road and make memories that will last a lifetime with the Touring Roof Rack as your trusted companion.
Compatibility:
- Up to 40″ Light Bar
- Compatible with Touring Roof Rack
- Stock or aftermarket roof rails on all Sprinter models required.
PLEASE NOTE: Roof racks and roof rack accessories may interfere with factory roof mounted satellite antennas. Antenna relocation may be required for full satellite radio functionality.
Maximize Your Sprinter’s Potential with the Aluminess Rear Door Storage Box Rack
More space. More freedom. The Aluminess Rear Door Box Rack transforms your Sprinter into a true adventure rig. Mount a rugged, lockable storage box right where you need it—easy to access and out of the way. Free up interior space for people and gear, while keeping your tools, recovery gear, or camp essentials safe and organized.
Built from lightweight, all-aluminum construction, it bolts directly to factory mounting points—no need for pivots, ball joints, or complicated installs. The rack swings with the rear door for smooth, intuitive use with zero maintenance required. Tough, clean, and trail-tested—it’s the upgrade your van’s been waiting for.
Key Features:
- Powder-coated textured black.
- No swapping hinges!
- No drill, no dent: Bolt-on item – requires no drilling through your door. Drilling through your van door might cause future dents and damage to your van!
- Installation does not require removing the hinge from the door. This keeps factory alignment of your door!
- Compatible with backup sensors.
- Dynamic Weight Capacity: 150 lbs.
Aluminess Weekender Sprinter Roof Rack turns your Mercedes Sprinter into a versatile cargo carrier. This roof rack system increases your van’s usable space. Now, you don’t need extra trailers or a second car. It’s perfect for hauling gear, from cargo boxes to surfboards. Plus, it’s great for lounging and enjoying the view. Made of sturdy aluminum, this rack is both light and durable. You can choose from two flooring options. Experience another level of freedom with your Weekender Sprinter Roof Rack.
Double Loop/Slats – Double Loop, Low Profile basket with slat flooring; walkable and easy to tie down cargo
Double Loop/Perforated – Double Loop, Low Profile basket with perforated flooring; great platform for lawn chairs, tripods, or a sleeping platform
Compatibility:
- Stock or aftermarket roof rails on all Sprinter models required.
PLEASE NOTE: Roof racks and roof rack accessories may interfere with factory roof mounted satellite antennas. Antenna relocation may be required for full satellite radio functionality.
