Take your gear-hauling capability to the next level with the PowerLift Trail Caddy – the perfect add-on for your Aluminess PowerLift Bike Rack. Designed with rugged overland utility and sleek form in mind, this platform creates a secure, elevated space to store essentials like coolers, boxes, firewood, trash, and more. Combined with the PowerLift automated up/down function, the Trail Caddy delivers your gear at the push of a button.
If you already run a PowerLift Bike Rack but need extra room for dirty gear, oversized coolers, or quick-access camp equipment, the Trail Caddy is the no-brainer solution. It’s the overland utility tray you didn’t know you needed, until now.
Whether you’re heading off-grid or rolling into camp, the Trail Caddy keeps your cargo accessible, secure, and out of your van’s interior.
Key Features
- Easy Access – Designed for and off the PowerLift platform, the Trail Caddy makes accessing essential gear easier than before.
- Practical Gear Storage – Store coolers, boxes, bins, firewood, wet clothes, trash, etc. to Aluminess’ Powerlift.
- Anchoring Points – Allows you to anchor via tie down ratchet strap corners (Bungie) or L-Track Tie Down, and more.
- Drainage – Corners allow for drainage to prevent water pooling
- Large Sizing – Dimensions are 34-inches by 21-inches and the 600sq inch base is designed to accommodate a variety of storage box sixes, including most 45 QT and 65 QT coolers
- Rugged Aesthetic Design – Aluminum sheet metal that has been formed and welded into position, providing a seamless, aggressive styling while increasing structural integrity and decreasing product weight
- Easy Installation – DIY friendly mounting locations and methods making installation very approachable. Compatibility Compatible with Aluminess PowerLift Bike Rack – Sprinter or Transit
Compatibility
- Compatible with Aluminess PowerLift Bike Rack – Sprinter or Transit
Take control of your dashboard clutter with the Charge Groove, a sleek cable organizer designed to improve access to your Sprinter’s built-in charging ports. Whether you’re powering up a phone, tablet, or GPS, this clever addition keeps cords managed and ports accessible so you can focus on the road ahead.
Crafted in-house by Terra X using durable Nylon 12 and SLS 3D printing, the Charge Groove is rugged and seamlessly integrate into your dash. It’s the easiest upgrade you’ll ever make to boost organization and functionality in your van.
Which One Fits Your Van?
- Fit is based on your dash layout, not your van’s year or model:
- Charge Groove (Standard) – Designed for dashes with air vents on either side of the charging compartment.
- XL Charge Groove – Designed for dashes without air vents beside the charging area.
If you’re unsure which model you need, just reach out and we’ll help you choose the right fit.
Key Features:
- Improves Access to Charging Ports: Keeps USB ports unobstructed and easy to reach
- Cable Management Made Simple: Reduces cord clutter in your center console
- Two Fit Options: Choose the Standard or XL model based on your dash style
- Rugged Nylon 12 Construction: Built with in-house SLS 3D printing for a factory-grade finish
- No Permanent Mods Required: Installs easily and stays put without damage
Compatibility:
- Mercedes-Benz Sprinter VS30 (2019+)
- Works with Storyteller Overland, Winnebago Revel, Ekko, Jayco Terrain, Tiffin, and more.
- If your van isn’t listed, reach out to us, here’s a good chance this fits your setup!
Organize your dash setup with the TERRA X Accessory Mounting Plate — designed to pair seamlessly with the Navidok Overlander X system. Whether you’re running comms, navigation, or power systems, this rugged platform keeps your critical gear right where you need it.
Built from powder-coated aluminum, the X Plate stands up to rough roads and daily use. It offers a clean, reliable place to mount the accessories that don’t always fit in standard dash layouts — from radios and charging hubs to gauges and switches.
This is the foundation for a clutter-free cabin and a more efficient drive. Whether you’re full-time on the road or heading out for the weekend, the X Plate is your upgrade for a dialed-in dash setup.
Key Features:
- Seamlessly compatibility with Navidok Overlander X
- Lightweight and durable powder-coated aluminum
- Clean Cable Management
- Easily mounts comms, power ports, navigation gear, or utility switches
- Quick Install
- Includes hardware and mounting brackets for an easy setup
Includes:
- Terra X – Accessory Mounting Plate (X Plate)
- Two Mounting Brackets
- Installation Hardware
Compatibility:
- Compatible with 2019+ Mercedes Sprinter
Reclaim your cab space and streamline your gear with the TERRA X VisorDok Mounting System. Designed specifically for Mercedes Sprinter vans, this innovative system transforms the unused space between your sun visors into a customizable, clutter-free command center, ideal for navigation, comms, and control gear.
Whether you opt for the VisorDok Track Mount or the VisorDok TubeTrak, both versions share a common goal: to keep your essential devices within reach without interfering with driving visibility or your visor function.
What They Have in Common
- Mounts Above Windshield Between Sun Visors – Perfect location for your most-used gear like GPS units, phones, tablets, radios, and dash cams.
- No-Drill Installation – Installs easily using your van’s factory visor clip locations. No cutting or modification required.
- Compatible with Multiple Mounting Systems – Accepts T-bolt style track balls, RAM Mounts, and 67 Designs components.
- No Visor Interference – Your sun visors retain full functionality post-installation.
- Made for Mercedes Sprinter Vans – Fits all VS30 models (2019+). Track Mount also available for NCV3 models (2008–2018).
- Proudly Made in the USA Two Mounting Styles — Choose What Fits Your Setup
VisorDok Tube Mount
Best for: Overlanders with a mix of mounting styles (tube clamps + track balls) or those who want an all-metal solution with maximum strength.
Mounting Compatibility:
- Standard tube clamps
- RAM Mounts Track Ball with T Bolt Attachment
- 67 Designs Series 20 Track Ball
- Any T-bolt compatible track ball system
VisorDok Track
Mount Best for: Users who want a streamlined and stealthy appearance.
Mounting Compatibility: T Bolt Attachment Track Balls
Compatibility:
- VisorDok Track Mount compatible with 2008+ Mercedes Sprinter
- VisorDok Tube Mount compatible with 2019+ Mercedes Sprinter
NAVIDOK Sprinter Dash Mount System – Full, Upper, or Lower Configurations
Take command of your dashboard with the NAVIDOK Dash Mount System by Terra X, a rugged, no-drill solution for securely mounting your navigation and travel essentials. Whether you’re outfitting a fully built-out rig or starting small and planning to upgrade later, this modular dash mounting system gives you a dependable, vibration-resistant base for securing navigation gear and devices, so they stay locked in and easy to view, even when the road gets rough.
Choose from the Full Dash Mount (upper and lower), Upper Mount only, or Lower Mount only. Each configuration is available for either the factory Sprinter dash or common modified dash setups like Winnebago Revel. Made in the USA and engineered for adventure, this system is designed to maintain full visibility and dash functionality, it keeps your view clear and your controls accessible for a distraction-free drive.
Key Features:
- Modular Configurations: Choose full mount, upper, or lower — each tailored for factory or modified dashes
- No-Drill: Installs cleanly using factory hardware — no holes, no damage
- Works with RAM® Mount products or other similar style T-track accessories
- Clean & Low-Profile: Mounts flush to dash with zero windshield obstruction
- Made in the USA: Designed and built by the Terra X team
Includes (Full Mount):
- NAVIDOK OverlanderX Upper Dash Plate & Mounting Brackets
- NAVIDOK Lower Dash Mount
Compatibility:
- Compatible with 2019+ Mercedes Sprinter
- Available for Factory Dash and Modified Dash (e.g., Revel)
Customize your Recon Modular Roof Rack with our easy-to-install Panel Full Kits, designed for Sprinter, Promaster and Transit vans. Whether you are mounting solar panels, securing gear, or just looking for a solid platform, these panels give you the flexibility to build your rack your way.
NOTE: Due to universal panel lengths, full and half rack configurations are approximate. Full floor kits may be slightly shorter than full length.
Choose from Small Panels (27″ x 17″) or Long Panels (44″ x 10″), or combine both to dial in the exact setup you need. Each panel uses our exclusive FrontLoader system, which allows seamless integration with Aluminess accessories, plus simple adjustments as your build evolves.
Install just a few panels for targeted gear mounting or fully deck out your roof for maximum utility. Whatever your adventure demands, these kits help you make the most of every square inch.
Key Features:
- Mix and match panel sizes for a custom fit
- Designed for solar panels, gear storage, rooftop tents, and more
- Lightweight, corrosion-resistant aluminum construction
- Easy to add, move, or remove with FrontLoader hardware
- Sold as kits for quick configuration
Compatibility:
- Compatible with Aluminess Recon Modular Roof Rack – Sprinter 2007+
- Compatible with Aluminess Recon Modular Roof Rack – Transit 2015+
- Compatible with Aluminess Recon Modular Roof Rack – Promaster 2014+
Customize your Recon Modular Roof Rack with our easy-to-install Panel Half Kits, designed for Sprinter2007+ vans. Whether you are mounting solar panels, securing gear, or just looking for a solid platform, these panels give you the flexibility to build your rack your way.
Choose from Small Panels (27″ x 17″) or Long Panels (44″ x 10″), or combine both to dial in the exact setup you need. Each panel uses our exclusive FrontLoader system, which allows seamless integration with Aluminess accessories, plus simple adjustments as your build evolves.
Install just a few panels for targeted gear mounting or fully deck out your roof for maximum utility. Whatever your adventure demands, these kits help you make the most of every square inch.
Key Features:
- Mix and match panel sizes for a custom fit
- Designed for solar panels, gear storage, rooftop tents, and more
- Lightweight, corrosion-resistant aluminum construction
- Easy to add, move, or remove with FrontLoader hardware
- Sold as kits for quick configuration
Compatibility:
- Compatible with Aluminess Recon Modular Roof Rack – Sprinter 2007+
Customize your Recon Modular Roof Rack with our easy-to-install Panel Starter Kits, designed for Sprinter, Promaster and Transit vans. Whether you are mounting solar panels, securing gear, or just looking for a solid platform, these panels give you the flexibility to build your rack your way.
Choose from Small Panels (27″ x 17″) or Long Panels (44″ x 10″), or combine both to dial in the exact setup you need. Each panel uses our exclusive FrontLoader system, which allows seamless integration with Aluminess accessories, plus simple adjustments as your build evolves.
Install just a few panels for targeted gear mounting or fully deck out your roof for maximum utility. Whatever your adventure demands, these kits help you make the most of every square inch.
Key Features:
- Mix and match panel sizes for a custom fit
- Designed for solar panels, gear storage, rooftop tents, and more
- Lightweight, corrosion-resistant aluminum construction
- Easy to add, move, or remove with FrontLoader hardware
- Sold as kits for quick configuration
Compatibility:
- Compatible with Aluminess Recon Modular Roof Rack – Sprinter 2007+
- Compatible with Aluminess Recon Modular Roof Rack – Transit 2015+
- Compatible with Aluminess Recon Modular Roof Rack – Promaster 2014+
Elevate your van’s functionality with the Aluminess Modular Roof Rack, engineered for 2007+ Mercedes Sprinters with a 144″ wheelbase. Whether you’re hitting the road for adventure or outfitting your van for work, this roof rack is the ultimate companion, offering superior durability and adaptable design.
Designed for the modern van enthusiast, this roof rack offers unmatched versatility. Easily reconfigure panels for ventilation when housing rooftop fans while maintaining full flooring around the fan for maximum utility. Its modular design ensures the perfect fit for any journey—whether you’re mounting solar panels for off-grid living, transporting surfboards, or carrying essential equipment for work or play.
Key Features:
- Adaptable to rear or front vent location
- Full-floor coverage design spans the entire roof
- DIY and user-friendly installation
- Optimize roof space
- Minimize wind resistance
- Durable build made with high-quality aluminium
- Powder-coated black for long-lasting use
- Easily mount solar panels
Product Includes:
- Large Floor Panel (x6)
- Small Floor Panel (x2)
- Side Rails Front – 1EA (2PCS)
- Side Rails Middle (x2)
- Side Rails Rear – 1EA (2PCS)
- Air Dam (x1)
- Back Panel (x1)
- Mounting hardware for seamless installation
Fitment Info:
- Compatible with Mercedes Sprinter 2007+ High Roof 144 WB ONLY
- Requires track mount system for installation factory track from Mercedes or Vantech USA Sprinter Track System
- Vantech track system requires interior van panels to be removed for installation
The most sold Sprinter van Side Ladder in the history of overlanding has been redesigned with updated features! Crafted from high-grade aluminum, the Legacy Ladder offers unparalleled strength and corrosion resistance, ensuring it can withstand the harshest terrains and weather conditions. Whether it’s accessing roof storage, rooftop tents, or simply capturing breathtaking views, the Sprinter van Legacy Side Ladder provides a secure and convenient solution for adventurers seeking new heights.
Key Features:
- High clearence: don’t get hung up on rocks!
- Redesigned flat steps for better access to your roof
- L-Track Bow-ties to secure additional accessories
- Maintains the unique and iconic look of going into the wheel-well
- RVIA Compliant
- Clears Flarespace Flares
- Ergonomic Spacing of Steps (all steps are evenly spaced for comfortable climbing)
- Easy Installation
- Ships for free!
Compatibility:
- Compatible with Aluminess nerf bars and side steps.
- Compatible with Storyteller and Winnebago Revel Conversion.
- Mounts to factory or aftermarket roof rails.
