The Aluminess Rear Door Box and Tire Rack for the Mercedes Sprinter van solves the problem of oversize tires not fitting under the van. Not only can you carry your full-size spare, but you will now have extra room under the van for auxiliary fuel and water tanks. This item bolts to factory locations inside of the door. No Drilling Required! Best of all, it works with both 180 and 270 hinges so there’s no need to fuss with painting and swapping out hinges just to mount your ladder. Don’t want to mount a spare? This tire rack can also hold one of our storage boxes!
Features:
- Powder-coated textured black.
- No swapping hinges!
- Includes limiting strap.
- No drill, no dent: Bolt-on item – requires no drilling through your door. Drilling through your van door might cause future dents and damage to your van!
- Compatible with backup sensors.
- Universal Tire Mounting System.
- Compatible with a RotopaX Mounting Kit.
- Dynamic Weight Capacity: 100 lbs.
Compatibility:
- Compatible with the 180 and 270 degree hinges.
- Fits Mercedes 2019-23 Sprinter; 2019-23 Revel; 2019-23 Storyteller.
- Box and other accessories NOT included.
This rear door, hinge-mounted rack is the starting point to build out your storage system. Once you have this piece you can add a BackPack plate, horizontal bike rack, vertical bike rack and/or boxes to your rear door.
Features:
Powder-coated textured black.
No swapping hinges!
Includes limiting strap.
No drill, no dent: Bolt-on item – requires no drilling through your door. Drilling through your van door might cause future dents and damage to your van!
Compatible with backup sensors.
Dynamic Weight Capacity: 200 lbs. evenly distributed.
Includes 8″ support posts to mount a box.
Compatibility:
Compatible with the 180 and 270 degree hinges.
Compatible with the low roof and high roof Sprinter.
Fits Mercedes 2019-23 Sprinter; 2019-23 Revel; 2019-23 Storyteller.
Box and other accessories NOT included.
Maximize your base unit with our BackPack FrontLOADING hole pattern mounting plates.
Our FrontLOADER pattern allows you to easily mount most accessories without awkwardly reaching behind the plate to hold a bolt or fastener.
Customize your configuration by buying either the upper or lower plate, or get both for full coverage.
Note: Includes BackPACK plate ONLY! Plate must mount to a rear door base unit rack.
Storage is at a premium on van builds. Aluminess solves this problem with our all-aluminum Surf and Paddle Board Carrier. Mount your paddle or surf board using one of our Surf Poles, driver-side ladder and a pair of surf hooks.
Key Features:
- Compatible with StoryTeller and Winnebago Revel Conversion.
- Penthouse surf pole is compatible with Sportsmobile, Field Van and Exclusive Outfitters low roof pop tops.
- Clears Flarespace Flares.
- Sits approximately 5.5″ inches from the side of the van.
- Ships for free!
- Compatibile with Aluminess nerf bars and side steps.
NOTE: Surf Pole is not compatible with all styles of nerf bars and side steps. Please contact our office to confirm our surf pole will work with your side steps and nerf bars.
NOTE: Sprinter High Roof and Low Roof require factory or after-market roof tracks for installation. Ladder and Surf Hooks sold separately.
Expedition vehicles can be tricky to get in and out of, especially if they are 4×4 and lifted. Our aluminum Nerf Bars for the Mercedes Sprinter van make it easy to get in and out of your van. They are designed to retain ground clearance, but also provide an easy place to help enter and exit your van. They are also a great way to protect your Sprinter from those pesky shopping carts. Now compatible with the factory A/C and auxiliary heater.
Nerf bars include both driver and passenger side.
The purpose of this product is to provide easy access to the inside and outside of your van without weighing down your suspension. Our nerf bars/side steps are not rock sliders.
The Aluminess Slimline Rear Bumper 2019+ is the perfect accessory to carry items that you do not want inside your vehicle, such as camping stoves, BBQs, and a spare tire, allowing you to put extra fuel or water underneath the vehicle. Our unique rear bumper was redesigned to deliver extra ground clearance and a stronger swing arm structure. Enjoy our three different configurations to accommodate your adventure!
Key Features:
- Powder-coated textured Black
- Lightweight aluminum
- Ability to mount boxes, lights, and accessories (not included in standard bumper price)
- Square light holes
- 100 Pound Weight Limit On Standard Swing Arm
- 200 Pound Weight Limit On Bike Rack Swing Arm
- 7500 Pound Towing Capacity
- 750 Pound Tongue Weight (weight in the Aluminess storage box counts against the tongue weight)
- 33 in. Maximum Tire Size
Compatibility:
- Does not fit 144 Wheel Base Dually Vans
- Vehicles with exhaust that extends past the rear pinch weld will need to shorten the exhaust for bumper to fit
- Sensor holes can be drilled upon request. However, back up sensors will not work. Compatible with the blind spot assist
