If you already have the Aluminess ladder and need a way to mount it to your new Modular Roof Rack, order this kit.
test
Fitment: 2023 Mercedes-Benz Sprinter
Rear Door Ladder – Sprinter 2019+
Whether you have an Aluminess roof rack or a simple storage box, the Sprinter roofs are a great place to store bulky things. The problem is how you get up there to strap everything down. Aluminess solves this problem with our all-aluminum Rear Door Sprinter van Ladder. This item bolts to factory locations inside of the door. No Drilling Required! For added safety, the top of the ladder is designed to lock in your foot, providing more secure footing when accessing your roof.
Best of all, it works with 180 and 270 hinges, so there’s no need to paint and swap out hinges just to mount your ladder. Need a box or tire with your ladder? Order the combo kit which comes with a mount for a box or tire and a set of sleek steps that allow you to climb up your Sprinter van ladder around the tire or box.
Features:
- Powder-coated textured black
- No swapping hinges!
- Includes limiting strap
- No drill, no dent: Bolt-on item – requires no drilling through your door. Drilling through your van door might cause future dents and damage to your van!
- Compatible with backup sensors
- Universal Tire Mounting System
- Didn’t purchase the combo kit? No worries! It’s an easy, bolt-on accessory that you can add later!
- Compatible with a RotopaX Mounting Kit
- Larger, adjustable folding steps for easy access past the tire or box
- Dynamic Weight Capacity: 100 lbs
- 300 lbs. Static Weight Capacity
Compatibility:
- Compatible with the 180 and 270 degree hinges.
- Fits Mercedes 2019-23 Sprinter; 2019-23 Revel; 2019-23 Storyteller.
Box and other accessories NOT included.
Rear Door Box/Tire Rack – Sprinter 2019+
Gear Up for the Wild with the Aluminess Rear Door Box and Tire Rack for the Mercedes Sprinter
Tackle remote trails and rugged terrain with confidence, this Rear Door Box and Tire Rack is built for the bold. Say goodbye to the hassle of oversized tires not fitting underneath your van. With this upgrade, you can carry a full-size spare where it’s accessible and secure, while freeing up valuable undercarriage space for auxiliary fuel or water tanks, essentials for those long hauls off the grid.
Engineered for ease, it bolts directly to factory door locations with no drilling required. It’s compatible with both 180° and 270° hinges, so there’s no need to mess with swapping or painting hardware. Whether you’re running a spare tire or prefer the versatility of one of our rugged storage boxes, this rack is ready for whatever adventure you throw at it.
Key Features:
- Powder-coated textured black.
- No swapping hinges!
- No drill, no dent: Bolt-on item – requires no drilling through your door. Drilling through your van door might cause future dents and damage to your van!
- Installation does not require removing the hinge from the door. This keeps factory alignment of your door!
- Tamper proof hardware provides extra level of security to reduce chances of wheel theft.
- Works with larger dually hub bore diameter!
- Compatible with backup sensors.
- Universal Tire Mounting System.
- Compatible with a RotopaX Mounting Kit.
- Don’t need to mount your spare on the back? Mount one of our boxes for extra storage instead!
- Dynamic Weight Capacity: 100 lbs.
Compatibility:
- Compatible with the 180 and 270 degree hinges.
- Fits Mercedes 2019-25 Sprinter; 2019-25 Revel; 2019-25 Storyteller.
- Box and other accessories NOT included.
Rear Door Rack Base Unit – Sprinter 2019+
Sprinter Rear Door Storage Rack – Modular Mounting System
Maximize your van’s rear storage with the Aluminess Rear Door Rack for the Mercedes Sprinter. This bolt-on, no-drill system is the foundation for mounting your bikes, gear, and boxes, without sacrificing interior space or drilling through your doors. Whether you’re keeping it simple with a box or going all-in with our PowerLift Bike Rack, this modular system adapts to your setup and your adventures.
Designed for versatility, this rack is compatible with horizontal bike mounts and solid storage boxes, and it supports the PowerLift for motorized e-bike lifting (180° hinges only). It’s the ultimate upgrade for vanlifers and overlanders who want versatility without compromise.
Key Features:
- Modular design – Add horizontal bike racks, storage boxes, or the PowerLift system
- No-drill install – Mounts to factory bolt locations, preserving your van’s finish
- PowerLift compatible – Add motorized bike loading with our PowerLift system (180° hinge only)
- Powder-coated textured black – Rugged, weather-resistant finish
- Dynamic weight capacity: 200 lbs (evenly distributed)
- Includes 8″ support posts – Ready to mount a storage box
- Optional 22″ support posts available – For expanded setups
- No hinge swap required for standard use
- Back-up sensor compatible – No false alerts or interference
Compatibility:
- Fits 2019+ Mercedes Sprinter, including Revel and Storyteller
- Compatible with Aluminess PowerLift Bike Rack
- Compatible with 180° (required for PowerLift – Kit available for sale) and 270° hinges
- Boxes, bike trays, PowerLift battery, and other accessories sold separately
BackPAC Rear Door Plate – Sprinter
Maximize your base unit with our BackPack FrontLOADING hole pattern mounting plates.
Our FrontLOADER pattern allows you to easily mount most accessories without awkwardly reaching behind the plate to hold a bolt or fastener.
Customize your configuration by buying either the upper or lower plate, or get both for full coverage.
Note: Includes BackPACK plate ONLY! Plate must mount to a rear door base unit rack.
Surf Pole – Sprinter 2007+
Storage is at a premium on van builds. Aluminess solves this problem with our all-aluminum Surf and Paddle Board Carrier. Mount your paddle or surf board using one of our Surf Poles, driver-side ladder and a pair of surf hooks.
Key Features:
- Compatible with StoryTeller and Winnebago Revel Conversion.
- Penthouse surf pole is compatible with Sportsmobile, Field Van and Exclusive Outfitters low roof pop tops.
- Clears Flarespace Flares.
- Sits approximately 5.5″ inches from the side of the van.
- Ships for free!
- Compatibile with Aluminess nerf bars and side steps.
NOTE: Surf Pole is not compatible with all styles of nerf bars and side steps. Please contact our office to confirm our surf pole will work with your side steps and nerf bars.
NOTE: Sprinter High Roof and Low Roof require factory or after-market roof tracks for installation. Ladder and Surf Hooks sold separately.
Nerf Bars – Sprinter
Expedition vehicles can be tricky to get in and out of, especially if they are 4×4 and lifted. Our aluminum Nerf Bars for the Mercedes Sprinter van make it easy to get in and out of your van. They are designed to retain ground clearance, but also provide an easy place to help enter and exit your van. They are also a great way to protect your Sprinter from those pesky shopping carts. Now compatible with the factory A/C and auxiliary heater.
Nerf bars include both driver and passenger side.
The purpose of this product is to provide easy access to the inside and outside of your van without weighing down your suspension. Our nerf bars/side steps are not rock sliders.
Slimline Rear Bumper – Sprinter 2019-24
The Aluminess Slimline Rear Bumper 2019+ is the perfect accessory to carry items that you do not want inside your vehicle, such as camping stoves, BBQs, and a spare tire, allowing you to put extra fuel or water underneath the vehicle. Our unique rear bumper was redesigned to deliver extra ground clearance and a stronger swing arm structure. Enjoy our three different configurations to accommodate your adventure!
Key Features:
- Powder-coated textured Black
- Lightweight aluminum
- Ability to mount boxes, lights, and accessories (not included in standard bumper price)
- Square light holes
- 100 Pound Weight Limit On Standard Swing Arm
- 200 Pound Weight Limit On Bike Rack Swing Arm
- 7500 Pound Towing Capacity
- 750 Pound Tongue Weight (weight in the Aluminess storage box counts against the tongue weight)
- 33 in. Maximum Tire Size
Compatibility:
- Does not fit 144 Wheel Base Dually Vans
- Vehicles with exhaust that extends past the rear pinch weld will need to shorten the exhaust for bumper to fit
- Sensor holes can be drilled upon request. However, back up sensors will not work. Compatible with the blind spot assist
Front Winch Bumper – Sprinter 2019-24
The Aluminess 2019+ Sprinter Front Winch Bumper is designed to protect your investment while providing a bold and aggressive design. This bumper, made of 6061 aluminum, provides strong protection for your van while also being lightweight. This not only keeps your vehicle safe but also helps you save money on fuel and suspension upgrades. A durable powder-coated finish adds to the corrosion-resistant properties of aluminum for a product that will stand the test of time.
So if you’re looking to explore the world while adding major protection to your vehicle, Aluminess and the 2019+ Sprinter Front Winch Bumper can get you there!
Configuration Options:
At Aluminess we can help you with whatever protection coverage you are looking for. Are interested in a more rugged look, winch-ready, and extra protection for your Sprinter van front bumper? Then our full coverage is your best choice! The product comes with a 2” Bull Bar, 1.5” Brush Guards, and a set of four (4) light openings.
Additionally, this Sprinter van bumper has options that include a configuration with Bull-Bar only, as well as a version that’s bumper only with no bar or guards.
All options include the Aluminess Integrated Compartment (bumper with winch) as well as two D-ring eyelets and a fairlead mount making this bumper compatible with today’s most popular winches and recovery accessories.
Key Features:
- 6061 aluminum construction provides high-strength, low-weight, and corrosion-resistant properties
- Durable textured black powder-coated finish
- Integrated Winch Compartment means no additional winch plate needed
- Bumper design allows for mounting of all popular lights, shackles, and accessories
- Incorporate a hitch receiver through a custom-build order
Compatibility:
-
- Compatible with all vehicle-equipped sensors and camera
- Frequent changes from winch manufacturers will likely necessitate solenoid relocation with this bumper
- For the 2014-18 Sprinter Front Bumper van click here
