2020 Ford Transit-250 Archives | Aluminess

test

PowerLift Trail Caddy

Take your gear-hauling capability to the next level with the PowerLift Trail Caddy – the perfect add-on for your Aluminess PowerLift Bike Rack. Designed with rugged overland utility and sleek form in mind, this platform creates a secure, elevated space to store essentials like coolers, boxes, firewood, trash, and more. Combined with the PowerLift automated up/down function, the Trail Caddy delivers your gear at the push of a button.

If you already run a PowerLift Bike Rack but need extra room for dirty gear, oversized coolers, or quick-access camp equipment, the Trail Caddy is the no-brainer solution. It’s the overland utility tray you didn’t know you needed, until now.

Whether you’re heading off-grid or rolling into camp, the Trail Caddy keeps your cargo accessible, secure, and out of your van’s interior.

Key Features

  • Easy Access – Designed for and off the PowerLift platform, the Trail Caddy makes accessing essential gear easier than before.
  • Practical Gear Storage – Store coolers, boxes, bins, firewood, wet clothes, trash, etc. to Aluminess’ Powerlift.
  • Anchoring Points – Allows you to anchor via tie down ratchet strap corners (Bungie) or L-Track Tie Down, and more.
  • Drainage – Corners allow for drainage to prevent water pooling
  • Large Sizing – Dimensions are 32.5-inches by 18.5-inches and the 600sq inch base is designed to accommodate a variety of storage boxes, including most 45 QT and 65 QT coolers
  • Rugged Aesthetic Design – Aluminum sheet metal that has been formed and welded into position, providing a seamless, aggressive styling while increasing structural integrity and decreasing product weight
  • Easy Installation – DIY friendly mounting locations and methods making installation very approachable.

Compatibility

  • Compatible with Aluminess PowerLift Bike Rack – Sprinter or Transit

Terra X VISORDOK Visor Mount – 2015-26 Ford Transit

Reclaim wasted space and bring essential gear within reach with the VISORDOK, a low-profile mounting solution crafted for Ford Transit vans equipped with the factory upper headliner shelf.

**YOUR TRANSIT MUST HAVE THE FACTORY UPPER HEADLINER WITH THE SHELF FOR THIS MODEL TO WORK!**

Designed and manufactured in the USA by Terra X, this product is perfect for navigating off-grid trails or just organizing your tech for daily drives. The VISORDOK delivers a sleek and secure platform for phones, tablets, GPS devices and more, right where you need them.

Streamlined Setup – No tools, no holes, no hassle

Designed for a fast, no-drill install, the VISORDOK replaces your sun visor clips using the factory hardware points. Just swap out the clips, tighten the bolts, and you’re ready to roll.

Lightweight and Durable – Built from premium materials

Constructed with ultra-lightweight carbon fiber tubing and robust nylon mounting brackets, the VISORDOK is built to handle rugged roads and relentless sun without adding bulk or rattle to your cabin.

Easy Compatibility – Works with your go-to gear

The 1″ outer diameter tube pairs seamlessly with most tube-clamp style mounting accessories, including popular RAM Mounts, Garmin Tread, phone cradles, dash cams, and more. Keep your dash clear and your tools accessible.

Smart Positioning – Keeps devices visible, not intrusive

Mounted high and centered, your devices stay in your natural line of sight for safer, distraction-free navigation. And yes, your sun visors still work just like they should.

NOTE: The VISORDOK is compatible with or without a rearview mirror. Mounting a device in front of your mirror may obstruct it.

What’s Included

  • (1) Fully assembled VISORDOK
  • (4) Mounting bolts

What You’ll Need

  • T30 Torx screwdriver

*Free shipping only when shipped within the contingent United States. Any shipments outside the contingent United States will need to inquire about shipping costs.

Terra X NAVIDOK Dash Mount System – 2015-26 Ford Transit

Upgrade your Ford Transit’s cockpit with the Navidok Dash Mount, the ultimate no-drill solution for vans equipped with the factory 12″ screen. Designed specifically for the Transit platform, this mount delivers a clean, rock-solid setup that doesn’t compromise your dash , or your devices.

Built for Transits with 12″ Displays

This is the first mount system engineered exclusively for Ford Transit vans featuring the 12-inch display. It blends seamlessly with the dash and requires no drilling, using a compression-fit installation that’s secure, simple, and completely reversible.

Modular by Design

Whether you’re running navigation, comms, or cameras, the dual integrated RAM® Tough-Balls and T-slot track gives you the freedom to mount what you need, exactly where you want it. From smartphones to tablets, action cams to GPS units, this setup handles it all.

Premium Materials and Zero Compromises

  • CNC-machined aluminum and high-strength Nylon 12
  • Durable black finish that complements your factory dash
  • Designed, tested, and refined specifically for overland and utility use

Compatible Devices (Examples):

  • iPhones, Android smartphones
  • Garmin Tread or Overlander units
  • iPads and tablets
  • Midland and GMRS radios
  • GoPros and action cameras
  • Switch panels and auxiliary controls

What’s Included:

  • (2) 1″ RAM® Tough-Ball™ mounts with 1/4″-20 x .375″ threaded studs
  • one for driver and one for passenger
  • Integrated top T-slot track (RAM Track Ball not included)
  • No-drill installation hardware

Want to upgrade to a C-size 1.5″ RAM ball or prefer using your own mounts? The included 1/4″-20 threaded studs are universal and fully swappable just reach out to us for help configuring your setup.

*Free shipping only when shipped within the contingent United States. Any shipments outside the contingent United States will need to inquire about shipping costs.

Recon Modular Roof Rack Full Kit – Sprinter, Promaster and Transit

Customize your Recon Modular Roof Rack with our easy-to-install Panel Full Kits, designed for Sprinter, Promaster and Transit vans. Whether you are mounting solar panels, securing gear, or just looking for a solid platform, these panels give you the flexibility to build your rack your way.

NOTE: Due to universal panel lengths, full and half rack configurations are approximate. Full floor kits may be slightly shorter than full length.

Choose from Small Panels (27″ x 17″) or Long Panels (44″ x 10″), or combine both to dial in the exact setup you need. Each panel uses our exclusive FrontLoader system, which allows seamless integration with Aluminess accessories, plus simple adjustments as your build evolves.

Install just a few panels for targeted gear mounting or fully deck out your roof for maximum utility. Whatever your adventure demands, these kits help you make the most of every square inch.

Key Features:

  • Mix and match panel sizes for a custom fit
  • Designed for solar panels, gear storage, rooftop tents, and more
  • Lightweight, corrosion-resistant aluminum construction
  • Easy to add, move, or remove with FrontLoader hardware
  • Sold as kits for quick configuration

Compatibility:

  • Compatible with Aluminess Recon Modular Roof Rack – Sprinter 2007+
  • Compatible with Aluminess Recon Modular Roof Rack – Transit 2015+
  • Compatible with Aluminess Recon Modular Roof Rack – Promaster 2014+
  • Designed exclusively for Recon roof racks, this add-on kit takes your setup to the next level—just pair it with an existing Recon rack or grab one to unlock its full potential!

Recon Modular Roof Rack Half Kit – Sprinter, Promaster and Transit

Customize your Recon Modular Roof Rack with our easy-to-install Panel Half Kits, designed for Sprinter, Transit and Promaster vans. Whether you are mounting solar panels, securing gear, or just looking for a solid platform, these panels give you the flexibility to build your rack your way.

NOTE: Due to universal panel lengths, full and half rack configurations are approximate. Half flooring kits may be slightly longer or shorter than 50% of the rack.

Choose from Small Panels (27″ x 17″) or Long Panels (44″ x 10″), or combine both to dial in the exact setup you need. Each panel uses our exclusive FrontLoader system, which allows seamless integration with Aluminess accessories, plus simple adjustments as your build evolves.

Install just a few panels for targeted gear mounting or fully deck out your roof for maximum utility. Whatever your adventure demands, these kits help you make the most of every square inch.

Key Features:

  • Mix and match panel sizes for a custom fit
  • Designed for solar panels, gear storage, rooftop tents, and more
  • Lightweight, corrosion-resistant aluminum construction
  • Easy to add, move, or remove with FrontLoader hardware
  • Sold as kits for quick configuration

Compatibility:

  • Compatible with Aluminess Recon Modular Roof Rack – Sprinter 2007+
  • Compatible with Aluminess Recon Modular Roof Rack – Transit 2015+
  • Compatible with Aluminess Recon Modular Roof Rack – Promaster 2014+
  • Designed exclusively for Recon roof racks, this add-on kit takes your setup to the next level—just pair it with an existing Recon rack or grab one to unlock its full potential!

Recon Modular Roof Rack Panel Kits – Sprinter, Promaster and Transit

Customize your Recon Modular Roof Rack with our easy-to-install Panel Starter Kits, designed for Sprinter, Promaster and Transit vans. Whether you are mounting solar panels, securing gear, or just looking for a solid platform, these panels give you the flexibility to build your rack your way.

NOTE: Maximum AC dimensions for AC kit on Sprinter racks is 43.5″ Long by 35.5″ wide. Maximum AC dimensions for AC kit on Transit and Promaster racks is 43.5″ Long by 40.5″ wide.

Choose from Small Panels (27″ x 17″) or Long Panels (44″ x 10″), or combine both to dial in the exact setup you need. Each panel uses our exclusive FrontLoader system, which allows seamless integration with Aluminess accessories, plus simple adjustments as your build evolves.

Install just a few panels for targeted gear mounting or fully deck out your roof for maximum utility. Whatever your adventure demands, these kits help you make the most of every square inch.

Key Features:

  • Mix and match panel sizes for a custom fit
  • Designed for solar panels, gear storage, rooftop tents, and more
  • Lightweight, corrosion-resistant aluminum construction
  • Easy to add, move, or remove with FrontLoader hardware
  • Sold as kits for quick configuration

Compatibility:

  • Compatible with Aluminess Recon Modular Roof Rack – Sprinter 2007+
  • Compatible with Aluminess Recon Modular Roof Rack – Transit 2015+
  • Compatible with Aluminess Recon Modular Roof Rack – Promaster 2014+
  • Designed exclusively for Recon roof racks, this add-on kit takes your setup to the next level—just pair it with an existing Recon rack or grab one to unlock its full potential!

Scratch & Dent – Weekender Roof Rack (148WB) – Transit

This is the Scratch & Dent version of our aluminum Weekender Ford Transit Roof Rack , perfect for carrying cargo boxes, surf boards, or just lounging around and watching the world go by.

Key Features:

  • Mounting Method: Fixed Mount
  • Flooring Type: Perforated
  • Wheelbase: 148″
  • Configuration: With High Roof and Regular Body
  • Touring Style/Perforated: All the same benefits as our Double loop with the added styling of the drop down front; Great for mounting light bars
  • 2 vent cutouts

Fitment Info:

  • Compatible with 2015+ Ford Transit vans.

PLEASE NOTE: Roof racks and roof rack accessories may interfere with factory roof mounted satellite antennas. Antenna relocation may be required for full satellite radio functionality.

Powerlift Bike Rack – 2015-26 Transit

Take the hassle out of loading and unloading your bikes with the Aluminess PowerLift Bike Rack. Designed for adventurers who value convenience, this innovative rack uses a power-assisted lift to effortlessly raise and lower your bikes. Whether you’re headed to the trail or returning from a ride, the PowerLift makes the experience effortless.

Constructed from durable, lightweight aluminum, this rack can hold up to 155 lbs in the motorized upper tray and 100 lbs in the static lower tray, making it perfect for a pair of today’s most popular e-bikes and a box for extra storage.

The rack has undergone extensive testing for both durability and vehicle compliance, ensuring it will stand the test of time while keeping your bikes secure on any adventure.

Max load powerlift.

Due to the wide variety of customer preferences, bike trays and batteries ARE NOT INCLUDED with the PowerLift. We offer several quality options for our customers available on our site at an additional cost.

Key Features:

  • Motorized upper tray maximum load: 155 lbs.
  • Static lower tray maximum load: 100 lbs.
  • Battery-Assisted Lift: Utilizes DeWalt 20V or Milwaukee 18V for effortless bike lifting.
  • Convenient Loading Height: Lowers the bike rack to a comfortable hip-height loading position of approximately 36 inches, depending on your vehicle’s size and suspension.
  • Easy Operation: Marine-grade, illuminated switch allows for simple up-and-down movement.
  • Upper Safety Latch: Automatically latches closed when the rack is raised, providing secure bike transportation.
  • Standard & High-Speed Rigging Options: Choose between two PowerLift rigging options – the standard configuration supports up to 155 pounds, while the high-speed option supports 100 pounds with a drastically faster lift & lower operation.
  • Safer and Cleaner Bike Transport: Elevates bikes above dust and debris for cleaner and safer transport.
  • Lower Storage Box Compatibility: Designed to fit an Aluminess Explorer Box below the upper lifting tray for additional storage. Please note, the PowerLift does not fit the Slim Box due to space and clearance requirements.
  • Incorporated Grab Handle Design: Includes a vehicle-specific rear door handle relocation system to center the rack on the door while keeping your taillights visible.

Fitment Specifications:

The Aluminess PowerLift Bike Rack is designed to be used exclusively with the Aluminess Base Unit. To ensure proper fitment, please review the following details:

  • Base Unit Compatibility: The PowerLift is compatible with 2015-Current Ford Transit Aluminess Base unit, PN 210579. If you do not have an Aluminess BackPAC Base Unit, we offer a package that includes this, PN 210783.

Recon Modular Roof Rack – 2015-26 Ford Transit

The Recon Modular Roof Rack is ideal for the DIY overland adventurer. A modular roof rack system for your Transit van that offers unparalleled versatility and cost-effective. You don’t need to have your flooring layout figured out up front; you are free to change!

Not sure where to start? Check out our Modular Panel Kits, designed to make planning and installation easier than ever.

Designed for customizing roof racks, it easily fits any vehicle’s roof layout and personal preferences. This flexibility optimizes roof space for various activities, whether it’s loading camping gear, kayaks, or other adventure essentials. It also accommodates various accessories, including rooftop tents, awnings, lights, and a range of Aluminess accessories.

Our Flooring Panels feature our innovative FrontLoader system, which provides the most versatility in the market and is fully compatible with our entire accessory line. You can now customize your Recon Modular Roof Rack to carry from solar panels to just a few accessories on your Transit roof.

The Aluminess Recon Modular Rack includes side rails, removable crossbars, and a front air dam. You can place the removable crossbars anywhere on this rack! The base price of the roof rack does not include the flooring panels – panels are sold separately.

Drawing featuring Aluminess Cruiser Modular Roof Rack

Key Features:

  • Adaptable to ANY Roof Layout
  • DIY Roof Rack Installation
  • Full Customization
  • Optimize Roof Space
  • Minimize wind resistance
  • User-friendly
  • Easily Mount Solar Panels!
  • Easily Add Flooring Panels (Sold Separately)
  • Includes 6-8 Removable Crossbars according to the Wheel Base
  • Free Shipping!

Dimensions Info:

148WB – Mid Roof
  • Length: 137.6″
  • Width: 61.0″
  • Height: 6.7″
  • Weight: 69 lbs
148WB – High Roof – Regular Body
  • Length: 125.8″
  • Width: 61.0″
  • Height: 6.7″
  • Weight: 67 lbs
148WB – High Roof – Extended Body
  • Length: 153.0″
  • Width: 61.0″
  • Height: 6.7″
  • Weight: 86 lbs

Compatibility:

  • Optional awning mounting brackets for Fiamma F45 or similar wall-mounted awnings.
  • Roof rack base price does not include flooring panels or additional roof rack accessories.
  • Zamp 100 Obsidian fits perfectly on the Long Panel!

Saved By The Tire – 2015-26 Ford Transit

Give your van serious explorer vibes with the Saved by the Tire Bundle—built for adventurers who don’t want to get stranded. This bundle is all about peace of mind and off-road readiness.

Worried about flats while overlanding? The included rear door spare tire mount has your back. Paired with our all-aluminum rear door ladder, you’ll also get easy, stable access to your roof for gear, rooftop views, or that perfect photo op.

But that’s not all—this bundle includes a Rotopax fuel container and locking mount that attach cleanly to the tire mount. It’s extra fuel when you need it most, giving you added range and reassurance between fill-ups, especially when you’re far from the next gas station.

Simple install. Serious capability. Real adventure-ready.

Saved By The Tire – Bundle Includes:

Key Features:

  • Easy no-drill installation utilizes factory mounting points.
  • Works with all hinges!
  • No drill, no dent: Bolt-on item – requires no drilling through your door. Drilling through the thin sheet metal of your van door might cause future dents and damage to your van!
  • For added grip and safety, the top of the ladder is shaped to lock in your foot for more confident climbing. Curved ladder tops are dangerous and don’t provide the support necessary when both climbing and securing cargo at the same time. Our ladder allows you to lock your foot up against the side of the ladder for leverage and confidence.
  • The ladder sits an average of 4.5” off the van giving ample room for your foot to comfortable step on each rung without adding too much length to the van.
  • The fold down steps included in the tire mount kit provide the largest surface area in the industry for easy access past the tire or storage box.
  • Compatible with backup sensors
  • Available with an optional universal Tire Mounting System
  • Didn’t purchase the combo kit? No worries! It’s an easy, bolt-on accessory that you can add later!
  • Compatible with a RotopaX Mounting Kit
  • Dynamic Weight Capacity: 100 lbs
  • 300 lbs. Static Weight Capacity
  • Powder-coated textured black

Compatibility:

  • Compatible with the Mid/High Roof Model
  • Compatible with the Mid/High Roof Model (call Aluminess)
  • Compatible with the 180 and 270 degree hinges
  • Fits 2015+ Ford Transit Mid/High Roof, Storyteller, Vandoit

Note: Passenger-side accessories not included.

Note: Call Aluminess for LOW ROOF configuration.